The dip switches are the very small white protrusions on the top of the grey vertical box just the right of the table.
There are a total of 8 dip switches labeled 1 thru 8. The number text is small and difficult to see.
3.To switch F to C (or C to F), Move dip switch #4 (the 4th one from the bottom) to the opposite position carefully with a fine-point pen, toothpick, or similar.
Right = Celsius
Left = Farenheit
4.Now press the small black button on the circuit board labeled “Hardware Reset” to read the new setting. There are 2 buttons, hit “HW RST” only. (If you press SW RST, it will change your program back to the factory defaults).
5.Finally, put the front half of the thermostat back onto the wall.